You are here

Publications

Search

Show only items where

Author

Type

Term

Year

Keyword

Export 30 results:

BibTeX

Author Keyword [ Title

Filters: First Letter Of Keyword is M and Author is Joaquim R. R. A. Martins [Clear All Filters]

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

A

D. A. Burdette, Kenway, G. K. W., and Martins, J. R. R. A., “Aerostructural design optimization of a continuous morphing trailing edge aircraft for improved mission performance”, in 17th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference , 2016.

BurdetteAviation2016.pdf (1.68 MB)

D. A. Burdette, Kenway, G. K. W., and Martins, J. R. R. A., “Aerostructural design optimization of a continuous morphing trailing edge aircraft for improved mission performance”, in 17th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference , 2016.

BurdetteAviation2016.pdf (1.68 MB)

D. A. Burdette, Kenway, G. K. W., and Martins, J. R. R. A., “Aerostructural design optimization of a continuous morphing trailing edge aircraft for improved mission performance”, in 17th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference , 2016.

BurdetteAviation2016.pdf (1.68 MB)

D. A. Burdette, Kenway, G. K. W., and Martins, J. R. R. A., “Aerostructural design optimization of a continuous morphing trailing edge aircraft for improved mission performance”, in 17th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference , 2016.

BurdetteAviation2016.pdf (1.68 MB)

D. A. Burdette, Kenway, G. K. W., Lyu, Z., and Martins, J. R. R. A., “Aerostructural Design Optimization of an Adaptive Morphing Trailing Edge Wing”, in AIAA SciTech, Kissimmee, FL, 2015.

Scitech2015.pdf (4.25 MB)

J. R. R. A. Martins, Alonso, J. J., and Reuther, J. J., “Aero-Structural Wing Design Optimization Using High-Fidelity Sensitivity Analysis”, in Proceedings of the CEAS Conference on Multidisciplinary Aircraft Design and Optimization, Köln, Germany, 2001, pp. 211–226.

R. Henderson, Martins, J. R. R. A., and Perez, R. E., “Aircraft Conceptual Design for Optimal Environmental Performance”, The Aeronautical Journal, vol. 116, no. 1175, p. 1—22, 2012.

Henderson2012.pdf (914.28 KB)

B

N. P. Tedford and Martins, J. R. R. A., “Benchmarking Multidisciplinary Design Optimization Algorithms”, Optimization and Engineering, vol. 11, pp. 159–183, 2010.

Tedford2010.pdf (979.1 KB)

C

N. P. Tedford and Martins, J. R. R. A., “On the Common Structure of MDO Problems: A Comparison of Architectures”, in Proceedings of the 11th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Portsmouth, VA, 2006.

N. P. Tedford and Martins, J. R. R. A., “Comparison of MDO Architectures within a Universal Framework”, in Proceedings of the 2nd AIAA Multidisciplinary Design Optimization Specialist Conference, Newport, RI, 2006.

N. R. Secco, Jasa, J. P., Kenway, G. K. W., and Martins, J. R. R. A., “Component-based Geometry Manipulation for Aerodynamic Shape Optimization with Overset Meshes”, AIAA Journal, vol. 56, no. 9, p. 3679, 2018.

pysurf2018_preprint.pdf (9.55 MB)

J. T. Hwang and Martins, J. R. R. A., “A computational architecture for coupling heterogeneous numerical models and computing coupled derivatives”, ACM TOMS, vol. 44, no. 4, 2018.

paper_mdolab.pdf (986.89 KB)

J. R. R. A. Martins, Alonso, J. J., and Reuther, J. J., “A Coupled-Adjoint Sensitivity Analysis Method for High-Fidelity Aero-Structural Design”, Optimization and Engineering, vol. 6, pp. 33–62, 2005.

Martins2005-A Coupled-Adjoint Sensitivity Analysis Method for High-Fidelity Aero-Structural-a..pdf (593.6 KB)

H

J. R. R. A. Martins, Alonso, J. J., and Reuther, J. J., “High-Fidelity Aerostructural Design Optimization of a Supersonic Business Jet”, Journal of Aircraft, vol. 41, pp. 523–530, 2004.

Martins2004-High-Fidelity Aerostructural Design Optimization of a Supersonic Business-a..pdf (2.01 MB)

G. L. O. Halila, Chen, G., Shi, Y., Fidkowski, K. J., Martins, J. R. R. A., and de Mendonça, M. Teixeira, “High-Reynolds number transitional flow simulation via parabolized stability equations with an adaptive RANS solver”, Aerospace Science and Technology, vol. 91, 2019.

Halila_AST_2019b_preprint.pdf (913.08 KB)

M

J. T. Hwang, Waas, A. M., and Martins, J. R. R. A., “Micromechanical Modeling and Design Optimization of 2-D Triaxial Braided Composites”, in Proceedings of the 50th AIAA Aerospace Sciences Meeting, Nashville, TN, 2012.

Hwang2012b.pdf (396.94 KB)

T. Ashuri, Zaaijer, M. B., Martins, J. R. R. A., van Bussel, G. J. W., and van Kuik, G. A. M., “Multidisciplinary Design Optimization of Offshore Wind Turbines for Minimum Levelized Cost of Energy”, Renewable Energy, vol. 68, pp. 893-905, 2014.

Ashuri_etal_MDOLAB_WindTurbineMDO.pdf (900.85 KB)

N. P. Bons, He, X., Mader, C. A., and Martins, J. R. R. A., “Multimodality in Aerodynamic Wing Design Optimization”, in 18th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Denver, CO, 2017.

N. P. Bons, He, X., Mader, C. A., and Martins, J. R. R. A., “Multimodality in Aerodynamic Wing Design Optimization”, AIAA Journal, 2019.

bons2019a_preprint.pdf (4.4 MB)

J. P. Jasa, Gray, J. S., Seidel, J. A., Mader, C. A., and Martins, J. R. R. A., “Multipoint Optimization of a Variable Cycle Engine Using Gradient-based Optimization”, in 57th AIAA Aerospace Sciences Meeting, AIAA SciTech Forum, San Diego, CA, 2019.

jasa_scitech_2019_submitted.pdf (1012.9 KB)

N

I. R. Chittick and Martins, J. R. R. A., “A New Subspace Optimization Method for Aero-Structural Design”, in Proceedings of the 3rd AIAA Multidisciplinary Design Optimization Specialist Conference, Waikiki, HI, 2007.

O

J. R. R. A. Martins and Marriage, C., “An Object-Oriented Framework for Multidisciplinary Design Optimization”, in Proceedings of the 3rd AIAA Multidisciplinary Design Optimization Specialist Conference, Waikiki, HI, 2007.

J. S. Gray, Hwang, J. T., Martins, J. R. R. A., Moore, K. T., and Naylor, B. A., “OpenMDAO: An open-source framework for multidisciplinary design, analysis, and optimization”, Structural and Multidisciplinary Optimization, vol. 59, no. 4, p. 1075--1104, 2019.

OpenMDAO_preprint.pdf (2.75 MB)

P

D. A. Burdette, Kenway, G. K. W., and Martins, J. R. R. A., “Performance Evaluation of a Morphing Trailing Edge Using Multipoint Aerostructural Design Optimization”, in 57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference , San Diego, CA, 2016.

BurdetteScitech2016.pdf (8.05 MB)

D. A. Burdette, Kenway, G. K. W., and Martins, J. R. R. A., “Performance Evaluation of a Morphing Trailing Edge Using Multipoint Aerostructural Design Optimization”, in 57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference , San Diego, CA, 2016.

BurdetteScitech2016.pdf (8.05 MB)

D. A. Burdette, Kenway, G. K. W., and Martins, J. R. R. A., “Performance Evaluation of a Morphing Trailing Edge Using Multipoint Aerostructural Design Optimization”, in 57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference , San Diego, CA, 2016.

BurdetteScitech2016.pdf (8.05 MB)

D. A. Burdette, Kenway, G. K. W., and Martins, J. R. R. A., “Performance Evaluation of a Morphing Trailing Edge Using Multipoint Aerostructural Design Optimization”, in 57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference , San Diego, CA, 2016.

BurdetteScitech2016.pdf (8.05 MB)

D. A. Burdette, Kenway, G. K. W., and Martins, J. R. R. A., “Performance Evaluation of a Morphing Trailing Edge Using Multipoint Aerostructural Design Optimization”, in 57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference , San Diego, CA, 2016.

BurdetteScitech2016.pdf (8.05 MB)

J. R. R. A. Martins, Marriage, C., and Tedford, N. P., “pyMDO: An Object-Oriented Framework for Multidisciplinary Design Optimization”, ACM Transactions on Mathematical Software, vol. 36, pp. 20:1–20:25, 2009.

Martins2009-pyMDO An Object-Oriented Framework for Multidisciplinary Design Optimizationa..pdf (1.44 MB)

S

J. R. R. A. Martins and Chittick, I. R., “Subspace Optimization of Multidisciplinary Systems Using Coupled Post-Optimality Sensitivity Analysis”, in Proceedings of the 7th World Congress on Structural and Multidisciplinary Optimization, Seoul, South Korea, 2007.