You are here

Home

Publications

Export 1020 results:
Sort by: Author Keyword Title [ Type (Desc)] Year
Unpublished
G. K. W. Kenway and J. R. R. A. Martins, “Multi-point High-fidelity Aerostructural Optimization of a Transport Aircraft Configuration”, Journal of Aircraft. 2013. Kenway-Martins-JoA-2013.pdf (9.42 MB)
Journal Articles
P. Thokala and J. R. R. A. Martins, “Variable Complexity Methods Applied to Airfoil Design”, Engineering Optimization, vol. 39, p. 271–286, 2006.
G. J. Kennedy, J. S. Hansen, and J. R. R. A. Martins, “A Timoshenko beam theory with pressure corrections for layered orthotropic beams”, International Journal of Solids and Structures, vol. 48, p. 2373–2382, 2011. paper.pdf (327.83 KB)
W. Shyy, Y. - C. Cho, W. Du, A. Gupta, C. - C. Tseng, and A. Sastry, “Surrogate-based modeling and dimension reduction techniques for multi-scale mechanics problems”, Acta Mechanica Sinica, p. 1-21, 2011.
E. Lee and J. R. R. A. Martins, “Structural Topology Optimization with Design-Dependent Pressure Loads”, Computer Methods in Applied Mechanics and Engineering, vol. 233–236, p. 40–48, 2012.
K. A. James, J. S. Hansen, and J. R. R. A. Martins, “Structural topology optimization for multiple load cases using a dynamic aggregation technique”, Engineering Optimization, vol. 41, p. 1103–1118, 2009.
E. Lee, K. A. James, and J. R. R. A. Martins, “Stress-Constrained Topology Optimization with Design-Dependent Loading”, Structural and Multidisciplinary Optimization, vol. 46, p. 647–661, 2012. Lee2012a.pdf (1.14 MB)
K. A. James, E. Lee, and J. R. R. A. Martins, “Stress-Based Topology Optimization Using an Isoparametric Level Set Method”, Finite Elements in Analysis and Design, vol. 58, p. 20–30, 2012.
G. K. W. Kenway, G. J. Kennedy, and J. R. R. A. Martins, “A scalable parallel approach for high-fidelity steady-state aeroelastic analysis and adjoint derivative computations”, AIAA Journal, 2012. kenway2013a.pdf (4.18 MB)
J. R. R. A. Martins and J. T. Hwang, “Review and Unification of Discrete Methods for Computing Derivatives of Single- and Multi-disciplinary Computational Models”, AIAA Journal, 2013. AIAAJ-derivatives.pdf (746.97 KB)
R. E. Perez, P. W. Jansen, and J. R. R. A. Martins, “pyOpt: a Python-Based Object-Oriented Framework for Nonlinear Constrained Optimization”, Structural and Multidisciplinary Optimization, vol. 45, no. 1, p. 101–118, 2012. pyOpt.pdf (2.02 MB)
J. R. R. A. Martins, C. Marriage, and N. P. Tedford, “pyMDO: An Object-Oriented Framework for Multidisciplinary Design Optimization”, ACM Transactions on Mathematical Software, vol. 36, p. 20:1–20:25, 2009.
N. Xue, W. Du, A. Gupta, W. Shyy, A. M. Sastry, and J. R. R. A. Martins, “Optimization of a Single Lithium-Ion Battery Cell with a Gradient-Based Algorithm”, Journal of The Electrochemical Society, vol. 160, no. 8, p. A1071-A1078. JECS_single_cell_opt.pdf (1.68 MB)
T. W. Simpson and J. R. R. A. Martins, “Multidisciplinary Design Optimization for Complex Engineered Systems Design: Report from an NSF Workshop”, Journal of Mechanical Design, vol. 133, no. 10, p. 101002, 2011. Simpson2011.pdf (666.06 KB)
J. R. R. A. Martins and A. B. Lambe, “Multidisciplinary design optimization: A Survey of architectures”, AIAA Journal, 2013. Martins-Lambe-AIAAJ-MDO-Survey.pdf (434.39 KB)
S. Haghighat, H. H. T. Liu, and J. R. R. A. Martins, “A Model Predictive Gust Load Alleviation Controller for a Highly Flexible Aircraft”, Journal of Guidance, Control and Dynamics, vol. 36, no. 6, p. 1751–1766, 2012. Haghighat2012b.pdf (10.85 MB)
A. C. Marta, C. A. Mader, J. R. R. A. Martins, E. van der Weide, and J. J. Alonso, “A methodology for the development of discrete adjoint solvers using automatic differentiation tools”, International Journal of Computational Fluid Dynamics, vol. 21, p. 307-327, 2007.
G. J. Kennedy and J. R. R. A. Martins, “A Laminate Parametrization Technique for Discrete Ply Angle Problems with Manufacturing Constraints”, Structural and Multidisciplinary Optimization, 2013. Kennedy2013a.pdf (394.08 KB)
K. A. James and J. R. R. A. Martins, “An Isoparametric Approach to Level Set Topology Optimization Using a Body-Fitted Finite Element Mesh”, Computers and Structures, vol. 90–91, p. 97-106, 2012. James2011a.pdf (1 MB)
G. J. Kennedy and J. S. Hansen, “The hybrid-adjoint method: a semi-analytic gradient evaluation technique applied to composite cure cycle optimization”, Optimization and Engineering, vol. 11, p. 23-43, 2010.
G. J. Kennedy and J. R. R. A. Martins, “A homogenization-based theory for anisotropic beams with accurate through-section stress and strain prediction”, International Journal of Solids and Structures, vol. 49, p. 54-72, 2012. hbtpaper.pdf (901.52 KB)
J. R. R. A. Martins, J. J. Alonso, and J. J. Reuther, “High-Fidelity Aerostructural Design Optimization of a Supersonic Business Jet”, Journal of Aircraft, vol. 41, p. 523–530, 2004.
A. B. Lambe and J. R. R. A. Martins, “Extensions to the Design Structure Matrix for the Description of Multidisciplinary Design, Analysis, and Optimization Processes”, Structural and Multidisciplinary Optimization, vol. 46, no. 2, p. 273-284, 2012. Lambe2012.pdf (289.49 KB)
W. Du, N. Xue, A. M. Sastry, J. R. R. A. Martins, and W. Shyy, “Energy Density Comparison of Li-ion Cathode Materials Using Dimensional Analysis”, Journal of The Electrochemical Society, vol. 160, p. A1187-A1193, 2013.
A. Gupta, J. H. Seo, X. Zhang, W. Du, A. M. Sastry, and W. Shyy, “Effective Transport Properties of LiMn2O4 Electrode via Particle-Scale Modeling”, Journal of The Electrochemical Society, vol. 158, p. A487-A497, 2011.
W. Du, A. Gupta, X. Zhang, A. M. Sastry, and W. Shyy, “Effect of cycling rate, particle size and transport properties on lithium-ion cathode performance”, International Journal of Heat and Mass Transfer, vol. 53, p. 3552 - 3561, 2010.
C. A. Mader and J. R. R. A. Martins, “Derivatives for Time-Spectral Computational Fluid Dynamics Using an Automatic Differentiation Adjoint”, AIAA Journal, vol. 50, no. 12, p. 2809-2819, 2012. Mader2012a.pdf (661.23 KB)
J. R. R. A. Martins, J. J. Alonso, and J. J. Reuther, “A Coupled-Adjoint Sensitivity Analysis Method for High-Fidelity Aero-Structural Design”, Optimization and Engineering, vol. 6, p. 33–62, 2005.
C. A. Mader and J. R. R. A. Martins, “Computation of Aircraft Stability Derivatives Using an Automatic Differentiation Adjoint Approach”, AIAA Journal, vol. 49, no. 12, p. 2737-2750, 2011.
J. R. R. A. Martins, P. Sturdza, and J. J. Alonso, “The Complex-Step Derivative Approximation”, ACM Transactions on Mathematical Software, vol. 29, p. 245–262, 2003. Martins2003CSD.pdf (533.7 KB)
N. P. Tedford and J. R. R. A. Martins, “Benchmarking Multidisciplinary Design Optimization Algorithms”, Optimization and Engineering, vol. 11, p. 159–183, 2010. Tedford2010.pdf (979.1 KB)
I. R. Chittick and J. R. R. A. Martins, “An Asymmetric Suboptimization Approach to Aerostructural Optimization”, Optimization and Engineering, vol. 10, p. 133–152, 2009.
R. P. Henderson, J. R. R. A. Martins, and R. E. Perez, “Aircraft Conceptual Design for Optimal Environmental Performance”, The Aeronautical Journal, vol. 116, no. 1175, p. 1—22, 2012. Henderson2012.pdf (914.28 KB)
I. R. Chittick and J. R. R. A. Martins, “Aero-Structural Optimization Using Adjoint Coupled Post-Optimality Sensitivities”, Structural and Multidisciplinary Optimization, vol. 36, p. 59–77, 2008.
P. Jansen, R. E. Perez, and J. R. R. A. Martins, “Aerostructural Optimization of Nonplanar Lifting Surfaces”, Journal of Aircraft, vol. 47, p. 1491–1503, 2010.
S. Haghighat, J. R. R. A. Martins, and H. H. T. Liu, “Aeroservoelastic Design Optimization of a Flexible Wing”, Journal of Aircraft, vol. 49, p. 432–443, 2012. Haghighat2012a.pdf (1.23 MB)
N. M. K. Poon and J. R. R. A. Martins, “An Adaptive Approach to Constraint Aggregation Using Adjoint Sensitivity Analysis”, Structural and Multidisciplinary Optimization, vol. 30, p. 61–73, 2007.
Q. Thomson and J. R. R. A. Martins, “Adaptive Accuracy Trust Region: Using Cross-Validation in the Optimization Process”, Engineering Optimization, vol. 43, p. 615–633, 2011.
C. A. Mader, J. R. R. A. Martins, J. J. Alonso, and E. van der Weide, “ADjoint: An Approach for the Rapid Development of Discrete Adjoint Solvers”, AIAA Journal, vol. 46, p. 863-873, 2008.
Conference Papers
P. Thokala and J. R. R. A. Martins, “Variable Complexity Methods Applied to Airfoil Optimization”, in Proceedings of the CASI Aircraft Design and Development Symposium, Toronto, ON, 2005.
A. B. Lambe and J. R. R. A. Martins, “A Unified Description of MDO Architectures”, in Proceedings of the 9th World Congress on Structural and Multidisciplinary Optimization, Shizuoka, Japan, 2011. paper248_1.pdf (263 KB)
C. A. Mader, G. K. W. Kenway, and J. R. R. A. Martins, “Towards High-Fidelity Aerostructural Optimization Using a Coupled ADjoint Approach”, in Proceedings of the 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Victoria, BC, 2008.
C. A. Mader, J. R. R. A. Martins, and A. C. Marta, “Towards Aircraft Design Using an Automatic Discrete Adjoint Solver”, in Proceedings of the 18th AIAA Computational Fluid Dynamics Conference, Miami, FL, 2007.
C. A. Mader, J. R. R. A. Martins, and A. C. Marta, “Towards Aerodynamic Shape Optimization of an Oblique Wing Using the ADjoint Approach”, in Proceedings of the CASI Conference, Toronto, ON, 2007.
K. A. James and J. R. R. A. Martins, “Topology Optimization Using a Level Set Method with an Arbitrary Structured Mesh”, in 6th AIAA Multidisciplinary Design Optimization Specialist Conference, Orlando, FL, 2010.
K. A. James and J. R. R. A. Martins, “Three-Dimensional Structural Topology Optimization of an Aircraft Wing Using Level Set Methods”, in Proceedings of the 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Victoria, BC, 2008.
J. R. R. A. Martins and I. R. Chittick, “Subspace Optimization of Multidisciplinary Systems Using Coupled Post-Optimality Sensitivity Analysis”, in Proceedings of the 7th World Congress on Structural and Multidisciplinary Optimization, Seoul, South Korea, 2007.
K. A. James, J. S. Hansen, and J. R. R. A. Martins, “Structural Topology Optimization for Multiple Load Cases While Avoiding Local Minima”, in Proceedings of the 4th AIAA Multidisciplinary Design Optimization Specialist Conference, Schaumburg, IL, 2008.
J. R. R. A. Martins and N. M. K. Poon, “On Structural Optimization Using Constraint Aggregation”, in Proceedings of the 6th World Congress on Structural and Multidisciplinary Optimization, Rio de Janeiro, Brazil, 2005.
A. T. Yu and J. R. R. A. Martins, “Structural Optimization of a Wing Box Using B-Spline Parametrization”, in Proceedings of the CASI Conference, {T}oronto, {ON}, 2007.
C. A. Mader and J. R. R. A. Martins, “Stability-Constrained Aerodynamic Shape Optimization of Flying Wings”, in Proceedings of the CASI Conference, Montreal, QC, 2011.
C. A. Mader and J. R. R. A. Martins, “Stability-Constrained Aerodynamic Shape Optimization of a Flying Wing Configuration”, in Proceedings of the 13th AIAA/ISSMO Multidisciplinary Analysis Optimization Conference, Forth Worth, TX, 2010.
G. K. W. Kenway, G. J. Kennedy, and J. R. R. A. Martins, “A Scalable Parallel Approach for High-Fidelity Aerostructural Analysis and Optimization”, in 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Honolulu, HI, 2012. Kenway2012.pdf (8.48 MB)
J. R. R. A. Martins and J. T. Hwang, “Review and Unification of Methods for Computing Derivatives of Multidisciplinary Systems”, in In Proceedings of the 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Honolulu, HI, 2012. Martins_Hwang_2012a.pdf (463.5 KB)
G. J. Kennedy and J. R. R. A. Martins, “A Regularized Discrete Laminate Parametrization Technique with Applications to Wing-Box Design Optimization”, in 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Honolulu, HI, 2012. Kennedy2012a.pdf (1.52 MB)
G. K. W. Kenway, et al., “Reducing Aviation's Environmental Impact Through Large Aircraft For Short Ranges”, in Proceedings of the 48th AIAA Aerospace Sciences Meeting and Exhibit, Orlando, FL, 2010. orlando_final.pdf (413.53 KB)
C. J. Marriage and J. R. R. A. Martins, “Reconfigurable Semi-Analytic Sensitivity Methods and MDO Architectures Within the $π$MDO Framework”, in Proceedings of the 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Victoria, BC, 2008. Marriage2008a.pdf (765.73 KB)
J. J. Alonso, P. LeGresley, E. van der Weide, J. R. R. A. Martins, and J. J. Reuther, “pyMDO: A Framework for High-Fidelity Multi-Disciplinary Optimization”, in Proceedings of the 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Albany, {NY}, 2004.
R. E. Perez and J. R. R. A. Martins, “pyACDT: An Object-Oriented Framework for Aircraft Design Modelling and Multidisciplinary Optimization”, in Proceedings of the 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Victoria, BC, 2008.
Q. Thomson and J. R. R. A. Martins, “Progressive Validity Trust Region Optimization Using a Kriging Metamodel”, in Proceedings of the 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Victoria, BC, 2008.
G. J. Kennedy and J. R. R. A. Martins, “Parallel Solution Methods for Aerostructural Analysis and Design Optimization”, in Proceedings of the 13th AIAA/ISSMO Multidisciplinary Analysis Optimization Conference, Forth Worth, TX, 2010.
C. A. Mader and J. R. R. A. Martins, “Optimal Flying Wings: A Numerical Optimization Study”, in 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Honolulu, HI, 2012. Mader2012.pdf (3.77 MB)
J. R. R. A. Martins and C. Marriage, “An Object-Oriented Framework for Multidisciplinary Design Optimization”, in Proceedings of the 3rd AIAA Multidisciplinary Design Optimization Specialist Conference, Waikiki, HI, 2007.
I. R. Chittick and J. R. R. A. Martins, “A New Subspace Optimization Method for Aero-Structural Design”, in Proceedings of the 3rd AIAA Multidisciplinary Design Optimization Specialist Conference, Waikiki, HI, 2007.
A. B. Lambe and J. R. R. A. Martins, “A New Approach to Multidisciplinary Design Optimization via Internal Decomposition”, in Proceedings of the 13th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Fort Worth, TX, 2010. Lambe_AIAA_MAO_2010_final.pdf (570.85 KB)
R. P. Liem, G. K. W. Kenway, and J. R. R. A. Martins, “Multi-point, multi-mission, high-fidelity aerostructural optimization of a long-range aircraft configuration”, in 14th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Indianapolis, IN, 2012. Liem2012a.pdf (8.26 MB)
R. E. Perez, R. Henderson, and J. R. R. A. Martins, “Multidisciplinary Design Optimization of Airframe and Engine for Emissions Reduction”, in Proceedings of the 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Victoria, BC, 2008.
S. Haghighat, H. H. T. Liu, and J. R. R. A. Martins, “Modeling and Simulation of Flexible UAVs with Large Aspect Ratio”, in Proceedings of the International Conference on System Simulation and Scientific Computing, Beijing, China, 2008.
J. T. Hwang, A. M. Waas, and J. R. R. A. Martins, “Micromechanical Modeling and Design Optimization of 2-D Triaxial Braided Composites”, in Proceedings of the 50th AIAA Aerospace Sciences Meeting, Nashville, TN, 2012. Hwang2012b.pdf (396.94 KB)
K. James and J. R. R. A. Martins, “Level Set Topology Optimization of Structures with Isoparametric Mesh Mapping”, in Proceedings of the 9th World Congress on Structural and Multidisciplinary Optimization, Shizuoka, Japan, 2011.
K. A. James and J. R. R. A. Martins, “Level Set Topology Optimization of Structures with Isoparametric Mesh Mapping”, in Proceedings of the 9th ISSMO World Congress on Structural and Multidisciplinary Optimization, Shizuoka, Japan, 2011.
J. T. Hwang, D. Y. Lee, J. W. Cutler, and J. R. R. A. Martins, “Large-Scale MDO of a Small Satellite using a Novel Framework for the Solution of Coupled Systems and their Derivatives”, in Proceedings of the 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Boston, MA, 2013. Hwang_SDM2013.pdf (2.95 MB)
S. Haghighat, J. R. R. A. Martins, and H. H. T. Liu, “Integrating an Active Control System with the Structural Design of a Flexible Wing Using Multidisciplinary Optimization”, in Proceedings of the International Forum on Aeroelasticity and Structural Dynamics, Seattle, USA, 2009.
G. J. Kennedy and J. S. Hansen, “The hybrid-adjoint gradient evaluation technique for gradient-based optimal cure cycle design”, in 21st Canadian Congress of Applied Mechanics, Ryerson University, Toronto, Ontario, 2007.
J. J. Alonso, J. R. R. A. Martins, J. J. Reuther, and R. Haimes, “High-Fidelity Aero-Structural Design Using a Parametric CAD-Based Model”, in Proceedings of the 16th AIAA Computational Fluid Dynamics Conference, Orlando, FL, 2003.
J. R. R. A. Martins, J. J. Alonso, and J. J. Reuther, “High-Fidelity Aero-Structural Design Optimization of a Supersonic Business Jet”, in Proceedings of the 43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Denver, CO, 2002.
S. Haghighat, H. H. T. Liu, and J. R. R. A. Martins, “Gust Load Alleviation Using Model Predictive Control for Large Aspect Ratio UAV Wings”, in Canadian Aeronautics and Space Institute Annual General Meeting, Ottawa, Canada, 2009.
Z. Lyu and J. R. R. A. Martins, “Graph Partitioning-Based Coordination Methods for Large-Scale Multidisciplinary Design Optimization Problems”, in Proceedings of the 14th AIAA/ISSMO Multidisciplinary Analysis Optimization Conference, Indianapolis, IN, 2012. Lu2012.pdf (1.27 MB)
J. T. Hwang and J. R. R. A. Martins, “GeoMACH: Geometry-Centric MDAO of Aircraft Configurations with High Fidelity”, in Proceedings of the 14th AIAA/ISSMO Multidisciplinary Analysis Optimization Conference, Indianapolis, IN, 2012. Hwang2012c.pdf (8.6 MB)
C. A. Mader, G. K. W. Kenway, and J. R. R. A. Martins, “A Framework for High-Fidelity Aerostructural Optimization of Aircraft Configurations”, in Proceedings of the International Conference on System Simulation and Scientific Computing, Beijing, China, 2008.
P. Peterson, J. R. R. A. Martins, and J. J. Alonso, “Fortran to Python Interface Generator with an Application to Aerospace Engineering”, in Proceedings of the 9th International Python Conference, Long Beach, CA, 2001.
A. T. Yu and J. R. R. A. Martins, “Efficient Coupled-Sensitivity Analysis Methods for Aero-Structural Optimization”, in Proceedings of the CASI Aircraft Design and Development Symposium, Toronto, {ON}, 2005.
J. T. Hwang and J. R. R. A. Martins, “A Dynamic Parametrization Scheme for Shape Optimization Using Quasi-Newton Methods”, in Proceedings of the 50th AIAA Aerospace Sciences Meeting, Nashville, TN, 2012. Hwang2012a.pdf (885.22 KB)
C. A. Mader and J. R. R. A. Martins, “A Discrete Adjoint Formulation for Stability Derivatives Using the ADjoint Approach”, in Proceedings of the CASI Conference, Kanata, ON, 2009.
J. R. R. A. Martins, J. J. Alonso, and J. J. Reuther, “A Coupled-Adjoint Sensitivity Analysis Method for Aero-Structural Optimization”, in Proceedings of the CASI Aircraft Design and Development Symposium, Montréal, QC, 2003.
J. Reuther, J. J. Alonso, J. R. R. A. Martins, and S. C. Smith, “A Coupled Aero-Structural Optimization Method for Complete Aircraft Configurations”, in Proceedings of the 37th AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, 1999.
J. R. R. A. Martins, P. Sturdza, and J. J. Alonso, “The Connection Between the Complex-Step Derivative Approximation and Algorithmic Differentiation”, in Proceedings of the 39th AIAA Aerospace Sciences Meeting, Reno, NV, 2001.
A. T. Yu and J. R. R. A. Martins, “A Configurable B-Spline Parametrization Method for Structural Optimization of Wing Boxes”, in Proceedings of the 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Victoria, BC, 2008.
R. Henderson and J. R. R. A. Martins, “Conceptual Design and Optimization of Environmentally-Friendly Aircraft”, in Proceedings of the 2009 SAE AeroTech Congress and Exhibition, 2009.
G. J. Kennedy and J. S. Hansen, “Composite processing optimization for residual stress reduction”, in 11th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Portsmouth, Virginia, 2006.
J. R. R. A. Martins, J. J. Alonso, and J. J. Reuther, “Complete Configuration Aero-Structural Optimization Using a Coupled Sensitivity Analysis Method”, in Proceedings of the 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Atlanta, GA, 2002.
G. J. Kennedy and J. R. R. A. Martins, “A Comparison of Metallic and Composite Aircraft Wings Using Aerostructural Design Optimization”, in 14th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Indianapolis, IN, 2012. Kennedy2012c.pdf (2.11 MB)
N. P. Tedford and J. R. R. A. Martins, “Comparison of MDO Architectures within a Universal Framework”, in Proceedings of the 2nd AIAA Multidisciplinary Design Optimization Specialist Conference, Newport, RI, 2006.
N. P. Tedford and J. R. R. A. Martins, “On the Common Structure of MDO Problems: A Comparison of Architectures”, in Proceedings of the 11th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Portsmouth, VA, 2006.
G. K. W. Kenway, G. J. Kennedy, and J. R. R. A. Martins, “A CAD-Free Approach to High-Fidelity Aerostructural Optimization”, in Proceedings of the 13th AIAA/ISSMO Multidisciplinary Analysis Optimization Conference, Fort Worth, TX, 2010. mao2010_final.pdf (5.8 MB)
J. R. R. A. Martins, I. M. Kroo, and J. J. Alonso, “An Automated Method for Sensitivity Analysis Using Complex Variables”, in Proceedings of the 38th AIAA Aerospace Sciences Meeting, Reno, NV, 2000.
J. R. R. A. Martins, J. J. Alonso, and E. van der Weide, “An Automated Approach for Developing Discrete Adjoint Solvers”, in Proceedings of the 2nd AIAA Multidisciplinary Design Optimization Specialist Conference, Newport, RI, 2006.
S. Haghighat, H. H. T. Liu, and J. R. R. A. Martins, “Application of Robust Control Design Techniques to the Aeroservoelastic Design Optimization of a Very Flexible UAV Wing”, in Proceedings of the 13th AIAA/ISSMO Multidisciplinary Analysis Optimization Conference, Fort Worth, TX, 2010.
S. Haghighat, H. H. T. Liu, and J. R. R. A. Martins, “Application of Model Predictive Control to Gust Loads Alleviation Systems”, in Proceedings of the AIAA Atmospheric Flight Mechanics Conference and Exhibit, Chicago, IL, 2009.
J. R. R. A. Martins, J. J. Alonso, and J. J. Reuther, “Aero-Structural Wing Design Optimization Using High-Fidelity Sensitivity Analysis”, in Proceedings of the CEAS Conference on Multidisciplinary Aircraft Design and Optimization, Köln, Germany, 2001, p. 211–226.
K. A. James, G. J. Kennedy, and J. R. R. A. Martins, “Aerostructural Topology Optimization of an Aircraft Wingbox”, in Proceedings of the CASI AERO 2011 Conference, Montreal, QC, 2011.
G. K. W. Kenway and J. R. R. A. Martins, “Aerostructural Shape Optimization of Wind Turbine Blades Considering Site-Specific Winds”, in Proceedings of the 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Victoria, BC, 2008. victoria.pdf (1.53 MB)
G. Kennedy, J. R. R. A. Martins, and J. S. Hansen, “Aerostructural Optimization of Aircraft Structures Using Asymmetric Subspace Optimization”, in Proceedings of the 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Victoria, BC, 2008.
G. J. Kennedy, J. R. R. A. Martins, and J. S. Hansen, “Aerostructural optimization of aircraft structures using asymmetric subspace optimization”, in 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Victoria, BC, 2008.
J. R. R. A. Martins, J. J. Alonso, and P. LeGresley, “Aero-Structural Optimization of Aircraft Configurations Using Coupled-Sensitivity Analysis”, in Proceedings of the SIAM Conference on Computational Science and Engineering, San Diego, CA, 2003.
G. J. Kennedy, “Aerostructural design optimization of composite aircraft with stress and local buckling constraints using an implicit structural parametrization”, in Proceedings of CASI AERO 2011, Montreal, Quebec, 2011.
G. J. Kennedy and J. R. R. A. Martins, “Aerostructural design optimization of composite aircraft with stress and local buckling constraints using an implicit structural parametrization”, in Proceedings of CASI AERO 2011, Montreal, Quebec, 2011.
S. Haghighat, J. R. R. A. Martins, and H. H. T. Liu, “Aeroservoelastic Design Optimization of a High Aspect Ratio Flying Wing”, in Proceedings of the International Forum on Aeroelasticity and Structural Dynamics, Paris, France, 2011.
C. A. Mader, A. C. Marta, and J. R. R. A. Martins, “Aerodynamic Shape Optimization of an Oblique Wing Using the ADjoint Approach”, in Proceedings of the 15th Conference of the CFD Society of Canada, Toronto, ON, 2007.
Z. Lyu and J. R. R. A. Martins, “Aerodynamic Shape Optimization of a Blended-Wing-Body Aircraft”, in Proceedings of the 51st AIAA Aerospace Sciences Meeting, Grapevine, TX, 2013. LYU_ASM_2013.pdf (20.59 MB)
G. J. Kennedy and J. R. R. A. Martins, “An Adjoint-based Derivative Evaluation Method for Time-dependent Aeroelastic Optimization of Flexible Aircraft”, in Proceedings of the 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Boston, MA, 2013. 2013_SDM.pdf (799.25 KB)
N. M. K. Poon and J. R. R. A. Martins, “Adaptive Constraint Aggregation for Structural Optimization Using Adjoint Sensitivities”, in Proceedings of the CASI Aircraft Design and Development Symposium, Toronto, {ON}, 2005.
J. R. R. A. Martins, C. A. Mader, and J. J. Alonso, “ADjoint: An Approach for Rapid Development of Discrete Adjoint Solvers”, in Proceedings of the 11th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Portsmouth, VA, 2006.
All
ZONA, “ZAERO Version 7.0 Theoretical Manual”. 2003.
M. Drela, “XFOIL –- An analysis and design system for low Reynolds number airfoils”, Low {R}eynolds number aerodynamics. 1989.
P. L. Jakab, “Wood to Metal: The Structural Origins of the Modern Airplane”, Journal of Aircraft, vol. 36. p. 914–918, 1999.
R. M. Hicks and P. A. Henne, “Wing Design by Numerical Optimization”, Journal of Aircraft, vol. 15. p. 407–412, 1978.
E. Hau, “Wind Turbines –- Fundamentals, Technologies, Application, Economics”. 2006.
J. Tangler and D. J. Kocurek, “Wind Turbine Post-Stall Airfoil Performance Characteristics Guidelines for Blade-Element Momentum Methods”, 43rd AIAA Aerospace Sciences Meeting and Exhibit. 2005.
G. D. J. Méndez, “Wind blade chord and twist angle optimization using genetic algoritms”, Fifth International Conference on Engineering Computational Technology. 2006.
G. V. Wilson, “Where's the real bottleneck in scientific computing”, American Scientist, vol. 94. p. 5–6, 2006.
W. E. Solutions, “Wes5 Tulipo”. 2005.
T. Melin, “A Vortex Lattice MATLAB Implementation for Linear Aerodynamic Wing Applications”. 2000.
R. Haimes and D. Edwards, “Visualization in a Parallel Processing Environment”. 1997.
IBM, “Visualization Data Explorer User's Reference”. 1997.
IBM, “Visualization Data Explorer User's Guide”. 1997.
IBM, “Visualization Data Explorer QuickStart Guide”. 1997.
X. Marduel, C. Tribes, and J. –Y. Trépanier, “Variable-fidelity optimization: Efficiency and robustness”, Optimization and Engineering, vol. 7. p. 479–500, 2006.
P. Thokala and J. R. R. A. Martins, “Variable-complexity optimization applied to airfoil design”, Engineering Optimization, vol. 39. p. 271–286, 2006.
W. C. Davidon, “Variable Metric Method for Minimization”, {SIAM} Journal on Optimization, vol. 1. p. 1–17, 1991.
P. Thokala, “Variable Complexity Optimization”. 2005.
P. Thokala and J. R. R. A. Martins, “Variable Complexity Methods Applied to Airfoil Optimization”, Proceedings of the CASI Aircraft Design and Development Symposium. 2005.
S. Benson, M. Krishnan, L. McInnes, J. Nieplocha, and J. Sarich, “Using the GA and TAO Toolkits for Solving Large-Scale Optimization Problems on Parallel Computers”, {ACM} Transactions on Mathematical Software, vol. 33. 2007.
W. Squire and G. Trapp, “Using Complex Variables to Estimate Derivatives of Real Functions”, SIAM Review, vol. 40. p. 110–112, 1998.
K. Amadori, B. Johansson, and P. Krus, “Using CAD-Tools and Aerodynamics Codes in a Distributed Conceptual Design Framework”, Proceedings of the 45th AIAA Aerospace Sciences Meeting and Exhibit. 2007.
P. E. Gill, W. Murray, and M. A. Saunders, “User's Guide for SNOPT Version 7, A Fortran Package for Large-Scale Nonlinear Programming”. 2005.
P. E. Gill, W. Murray, M. A. Saunders, and M. H. Wright, “User's Guide for SNOPT 5.3: A Fortran Package for Large-scale Nonlinear Programming”. 1998.
P. E. Gill, W. Murray, M. A. Saunders, and M. H. Wright, “User's Guide for NPSOL (version 4.0). A FORTRAN Package Nonlinear Programming”. 1986.
P. E. Gill, W. Murray, M. A. Saunders, and M. H. Wright, “User's Guide for NPSOL 5.0: A Fortran Package for Nonlinear Programming”. 1994.
J. J. Spillman, “The Use of Wing Tip Sails to Reduce Vortex Drag”, Aeronautical Journal. p. 387–395, 1978.
R. D. Fink, “USAF Stability and Control DATCOM”. 1975.
E. van der Weide, G. Kalitzin, J. Schluter, and J. J. Alonso, “Unsteady Turbomachinery Computations Using Massively Parallel Platforms”, Proceedings of the 44th {AIAA} Aerospace Sciences Meeting and Exhibit. 2006.
H. M. Tsai, A. S. F. Wong, J. Cai, Y. Zhu, and F. Liu, “Unsteady Flow Calculations with a Parallel Multiblock Moving Mesh Algorithm”, {AIAA} Journal, vol. 39. p. 1021–1029, 2001.
B. M. Kulfan, “A Universal Parametric Geometry Representation Method –- ``CST''”, Proceedings of the 45th AIAA Aerospace Sciences Meeting and Exhibit. 2007.
B. M. Kulfan, “Universal Parametric Geometry Representation Method”, Journal of Aircraft. p. 142–158, 2008.
A. B. Lambe and J. R. R. A. Martins, “A Unified Description of MDO Architectures”, Proceedings of the 9th World Congress on Structural and Multidisciplinary Optimization. 2011.
A. J. de Wit, “A unified approach towards decomposition and coordination for multi-level optimization”. 2009.
C. B. Allen and T. C. S. Rendall, “Unified Approach to CFD-CSD Interpolation and Mesh Motion using Radial Basis Functions”, Proceedings of the 25th AIAA Applied Aerodynamics Conference. 2007.
B. D. A. A. Minai and Y. Bar–Yam, “Understanding Complex Systems”. 2006.
M. S. Gockenbach, “Understanding Code Generated by TAMC”. 2000.
C. Farhat and F. - X. Roux, “An unconventional domain decomposition method for an efficient parallel solution of large-scale finite element systems”, SIAM J. Sci. Stat. Comput., vol. 13. p. 379–396, 1992.
I. M. Kroo, “Unconventional Configurations for Efficient Supersonic Flight”, {VKI} lecture series on Innovative Configurations and Advanced Concepts for Future Civil Aircraft. 2005.
D. Pilone and N. Pitman, “UML 2.0 in a Nutshell”. 2005.
M. J. Chonoles and J. A. Schardt, “UML 2 for Dummies”. 2003.
W. von Hagen, “Ubuntu Linux”. 2007.
A. –V. de Miguel, “Two Decomposition Algorithms for Nonconvex Optimization Problem with Global Variables”. 2001.
J. E. Dennis, M. Heinkenschloss, and L. N. Vicente, “Trust-region interior-point SQP algorithms for a class of nonlinear programming problems”, SIAM Journal on Control and Optimization, vol. 36. p. 1750–1794, 1998.
S. Shankaranarayanan, R. T. Haftka, and R. K. Kapania, “Truss Topology Optimization with Simultaneous Analysis and Design”, AIAA Journal, vol. 32. p. 420–424, 1994.
E. Sturler, “Truncation Strategies for Optimal Krylov Subspace Methods”, SIAM Journal on Numerical Analysis, vol. 36. p. 864–889, 1999.
P. Upham, J. Maughan, D. Raper, and C. Thomas, “Towards Sustainable Aviation”. 2003.
E. Livne, L. A. Schmit, Jr., and P. P. Friedmann, “Towards Integrated Multidisciplinary Synthesis of Actively Controlled Fiber Composite Wings”, Journal of Aircraft, vol. 27. p. 979–992, 1990.
C. A. Mader, G. Kenway, and J. R. R. A. Martins, “Towards High-Fidelity Aerostructural Optimization Using a Coupled ADjoint Approach”, Proceedings of the 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. 2008.
C. A. Mader, J. R. R. A. Martins, and A. C. Marta, “Towards Aircraft Design Using an Automatic Discrete Adjoint Solver”, Proceedings of the 18th AIAA Computational Fluid Dynamics Conference. 2007.
C. A. Mader, J. R. R. A. Martins, and A. C. Marta, “Towards Aerodynamic Shape Optimization of an Oblique Wing Using the ADjoint Approach”, Proceedings of the CASI Conference. 2007.
D. W. Zingg and L. Billing, “Toward Practical Aerodynamic Design Through Numerical Optimization”, Proceedings of the 18th AIAA Computational Fluid Dynamics Conference. 2007.
K. A. James and J. R. R. A. Martins, “Topology Optimization Using a Level Set Method with an Arbitrary Structured Mesh”, 6th AIAA Multidisciplinary Design Optimization Specialist Conference. 2010.
M. P. Bendsøe and P. Duysinx, “Topology Optimizatin of Continuum Structures with Local Stress Constraints”, International Journal for Numerical Methods in Engineering, vol. 43. p. 1453–1478, 1998.
“Tools for Automatic Differentiation”. .
A. S. Ning and I. Kroo, “Tip Extensions, Winglets, and C-wings: Conceptual Design and Optimization”, Proceedings of the 26th AIAA Applied Aerodynamics Conference. 2008.
R. W. Mee, “Three-Level Simplex Designs and Their Use in Sequential Experimentation”, Journal of Quality Technology, vol. 34. p. 152-164, 2002.
K. James and J. R. R. A. Martins, “Three-Dimensional Structural Topology Optimization of an Aircraft Wing Using Level Set Methods”, Proceedings of the 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. 2008.
P. A. B. Christian Bak, Jeppe Johansen, “Three-Dimensional Corrections of Airfoil Characteristics Based on Pressure Distributions”, European Wind Energy Conference & Exhibition. 2006.
F. T. Johnson, E. N. Tinoco, and J. N. Yu, “Thirty years of development and application of CFD at Boeing Commercial Airplanes, Seattle”, Computers & Fluids, vol. 34. p. 1115–1151, 2005.
F. T. Johnson, E. N. Tinoco, and N. J. Yu, “Thirty Years of Development and Application of CFD at Boeing Commercial Airplanes, Seattle”, AIAA Computational Fluid Dynamics Conference. 2003.
R. T. Jones, “Theory of Wing-Body Drat at Supersonic Speeds”. .
I. H. Abbott and A. E. Von Doenhoff, “Theory of wing sections, including a summary of airfoil data”. 1959.
T. Theodorsen, “Theory of Propellers”. 1949.
J. S. Przemieniecki, “Theory of Matrix Structural Analysis”. 1985.
D. S. Johnson, “A Theoretician's Guide to the Experimental Analysis of Algorithms”, Data Structures, Near Neighbor Searches, and Methodology: Fifth and Sixth DIMACS Implementation Challenges. p. 215–250, 2002.
H. H. Heyson, G. D. Roebe, and C. L. Fulton, “Theoretical parametric study of the relative advantages of winglets and wing-tip extensions”. 1977.
K. Asai, “Theoretical Considerations in Aerodynamic Effectivness of Winglets”, Journal of Aircraft, vol. 22. p. 635–637, 1985.
J. Sobieszczanski–Sobieski, “A technique for locating function roots and for satisfying equality constraints in optimization”, Structural Optimization, vol. 4. p. 241–243, 1992.
H. M. Kim, N. F. Michelena, P. Y. Papalambros, and T. Jian, “Target Cascading in Optimal System Design”, {ASME} Journal of Mechanical Design, vol. 125. p. 474-480, 2003.
H. M. Kim, “Target Cascading in Optimal System Design”. 2001.
L. Hascoët, “TAPENADE: A tool for Automatic Differentiation of programs”, Proceedings of 4$^{th}$ European Congress on Computational Methods, ECCOMAS'2004, Jyvaskyla, Finland. 2004.
L. Hascoët and V. Pascual, “TAPENADE 2.1 User's Guide”. 2004.
R. Giering, “Tangent Linear and Adjoint Model Compiler Users Manual”. 1997.
G. J. Kennedy, J. S. Hansen, and J. R. R. A. Martins, “A Timoshenko beam theory with pressure corrections for layered orthotropic beams”, International Journal of Solids and Structures, vol. 48. p. 2373–2382, 2011.
G. J. Kennedy, J. S. Hansen, and J. R. R. A. Martins, “A Timoshenko beam theory with pressure corrections for layered orthotropic beams”, International Journal of Solids and Structures. 2011.
B. S. Blanchard and W. J. Fabrycky, “Systems Engineering and Analysis”. 1998.
J. H. Brill, “Systems Engineering –- A Retrospective View”, Systems Engineering, vol. 1. p. 258–-266, 1998.
D. V. Steward, “Systems Analysis and Management: Structure, Strategy, and Design”. 1981.
D. V. Steward, “Systems Analysis and Management: Structure, Strategy and Design”. 1981.
G. Kreisselmeier and R. Steinhauser, “Systematic Control Design by Optimizing a Vector Performance Index”, International Federation of Active Controls Syposium on Computer-Aided Design of Control Systems, Zurich, Switzerland. 1979.
J. J. Lee, I. A. Waitz, B. Y. Kim, G. G. Fleming, L. Maurice, and C. A. Holsclaw, “System for assessing Aviation's Global Emissions (SAGE), Part 2: Uncertainty assessment”, Transportation Research Part D, vol. 12. p. 381–395, 2007.
B. Y. Kim, et al., “System for assessing Aviation's Global Emissions (SAGE), Part 1: Model description and inventory results”, Transportation Research Part D, vol. 12. p. 325–346, 2007.
C. A. Felippa and K. C. Park, “Synthesis Tools for Structural Dynamics and Partitioned Analysis of Coupled Systems”. .
E. Torenbeek, “Synthesis of Subsonic Airplane Design”. 1990.
R. E. Perez and K. Behdinan, “Swarm Intelligence, Focus on Ant and Particle Swarm Optimization”. p. 373–394, 2007.
R. Perez and K. Behdinan, “Swarm Intelligence: Focus on Ant and Particle Swarm Optimization”. p. 373-394, 2007.
R. E. Perez and K. Behdinan, “Swarm Intelligence: Focus on Ant and Particle Swarm Optimization”. p. 532 - 553, 2007.
R. Perez and K. Behdinan, “Swarm Intelligence: Focus on Ant and Particle Swarm Optimization”. p. 373-394, 2007.
J. A. Samareh, “Survey of Shape Parameterization Techniques for High-Fidelity Multidisciplinary Shape Optimization”, {AIAA} Journal, vol. 39. p. 877–884, 2001.
R. Ganguli, “Survey of Recent Developments in Rotorcraft Design Optimization”, Journal of Aircraft, vol. 41. p. 493–510, 2004.
M. J. D. Powell, “A Survey of Numerical Methods for Unconstrained Optimization”, SIAM Review, vol. 12. p. 79-97, 1970.
M. K. Chan, “Supersonic Aircraft Optimization for Minimizing Drag and Sonic Boom”. 2003.
J. W. Demmel, S. C. Eisenstat, J. R. Gilbert, X. S. Li, and J. W. H. Liu, “A supernodal approach to sparse partial pivoting”, SIAM J. Matrix Analysis and Applications, vol. 20. p. 720-755, 1999.
X. S. Li and J. W. Demmel, “SuperLU\_DIST: A Scalable Distributed-Memory Sparse Direct Solver for Unsymmetric Linear Systems”, ACM Trans. Mathematical Software, vol. 29. p. 110-140, 2003.
F. Bauer, P. Garabedian, D. Korn, and A. Jameson, “Supercritical Wing Sections II”. 1975.
J. R. R. A. Martins and I. R. Chittick, “Subspace Optimization of Multidisciplinary Systems Using Coupled Post-Optimality Sensitivity Analysis”, Proceedings of the 7th World Congress on Structural and Multidisciplinary Optimization. 2007.
G. D. Cheng and Z. Jiang, “Study on topology optimization with stress constraints”, Engineering Optimization. 1992.
E. Lee and J. R. R. A. Martins, “Structural Topology Optimization with Design-Dependent Pressure Loads”, Computer Methods in Applied Mechanics and Engineering. 2011.
K. A. James, J. S. Hansen, and J. R. R. A. Martins, “Structural Topology Optimization for Multiple Load Cases While Avoiding Local Minima”, Proceedings of the 4th AIAA Multidisciplinary Design Optimization Specialist Conference. 2008.
K. James, J. S. Hansen, and J. R. R. A. Martins, “Structural topology optimization for multiple load cases using a dynamic aggregation technique”, Engineering Optimization, vol. 41. p. 1103–1118, 2009.
L. A. Schmit, Jr., “Structural synthesis –- precursor and catalyst. Recent experiences in multidisciplinary analysis and optimization”. 1984.
D. C. Jegley, A. E. Lovejoy, and H. G. Bush, “Structural Response and Failure of a Full-Scale Stitched Graphite-Epoxy Wing”, Proceedings of the 42nd AIAA Structures, Structural Dynamics and Materials Conference. 2001.
G. Allaire, J. c}ois Fran{\, and A. –M. Toader, “Structural optimization using sensitivity analysis and a level-set method”, Journal of Computational Physics, vol. 194. p. 363–393, 2004.
J. R. R. A. Martins and N. M. K. Poon, “On Structural Optimization Using Constraint Aggregation”, Proceedings of the 6th World Congress on Structural and Multidisciplinary Optimization. 2005.
A. T. Yu and J. R. R. A. Martins, “Structural Optimization of a Wing Box Using B-Spline Parametrization”, Proceedings of the CASI Conference. 2007.
H. A. Lee, Y. I. Kim, G. J. Park, R. M. Kolonay, M. Blair, and R. A. Canfield, “Structural Optimization of a Joined Wing Using Equivalent Static Loads”, Journal of Aircraft, vol. 44. p. 1302–1308, 2007.
S. Venkatamaran and R. T. HAFTKA, “Structural optimization complexity: what has Moore's law done for us?”, Structural and Multidisciplinary Optimization, vol. 28. p. 375–-387, 2004.
U. Kirsch, “Structural Optimization”. 1993.
D. C. Jegley, “Structural Efficiency of Stitched Composite Panels with Stiffener Crippling”, Journal of Aircraft, vol. 42. p. 1273–1280, 2005.
D. Jegley, “Structural Efficiency of Stitched Composite Panels with Stiffener Crippling”, Journal of Aircraft, vol. 42. p. 1273–1280, 2002.
M. Paz and W. Leight, “Structural Dynamics, Theory and Computation”. 2004.
K. A. James, E. Lee, and J. R. R. A. Martins, “Stress-Based Topology Optimization Using an Isoparametric Level Set Method”, Finite Element Analysis & Design. 2011.
E. de Struler, “Strategies for optimal Krylov subspace methods”, {SIAM} Journal on Numerical Analysis, vol. 36. p. 864–889.
M. J. Turner, R. W. Clough, H. C. Martin, and L. J. Topp, “Stiffness and Deflection Analysis of Complex Structures”, Journal of Aeronautical Science, vol. 23. p. 805–823, 1956.
J. C. Newman III, D. L. Whitfield, and K. W. Anderson, “Step-Size Independent Approach for Multidisciplinary Sensitivity Analysis”, Journal of Aircraft, vol. 40. p. 566–573, 2003.
A. Dillmann and C. - C. Rossow, “Status Report 2000–2008, Part I: Research”. 2008.
J. D. Bohlmann, C. V. Eckstrom, and T. a. Weisshaar, “Static aeroelastic tailoring for oblique wing lateral trim”, Journal of Aircraft, vol. 27. p. 558–563, 1990.
C. A. Mader and J. R. R. A. Martins, “Stability-Constrained Aerodynamic Shape Optimization of Flying Wings”, Proceedings of the CASI Conference. 2011.
C. A. Mader and J. R. R. A. Martins, “Stability-Constrained Aerodynamic Shape Optimization of a Flying Wing Configuration”, Proceedings of the 13th AIAA/ISSMO Multidisciplinary Analysis Optimization Conference. 2010.
P. E. Gill, W. Murray, and M. A. Saunders, “An SQP algorithm for large-scale constrained optimization”, Society for Industrial and Applied Mathematics, vol. 47. 2005.
C. Ashcraft and R. Grimes, “SPOOLES: An object-oriented sparse matrix library”, Proceedings of the 1999 SIAM Conference on Parallel Processing for Scientific Computing. 1999.
L. B. Gratzer and J. Clark, “The Spiroid–Tipped Wing, US Patent No. 5,102,068.”. 1999.
S. Tosserams, A. T. Hoftkamp, L. F. P. Etman, and J. E. Rooda, “A Specification Language for Problem Partitioning in Decomposition-Based Design Optimization”, Structural and Multidisciplinary Optimization, vol. 42. p. 707–723, 2010.
H. A. Kim, D. Kennedy, and Z. Gürdal, “Special issue on optimization of aerospace structures”, Structural and Multidisciplinary Optimization, vol. 36. p. 1–2, 2008.
M. Wintzer, “Span Efficiency Prediction Using Adjoint-Driven Mesh Refinement”, Journal of Aircraft, vol. 47. p. 1468–1470, 2010.
S. K. Nadarajah, A. Jameson, and J. J. Alonso, “Sonic Boom Reduction using an Adjoint Method for Wing-Body Configurations in Supersonic Flow”. 2002.
X. Hu and R. C. Eberhart, “Solving Constrained Nonlinear Optimization Problems with Particle Swarm Optimization”, Proceedings of the Sixth World Multiconference on Systemics, Cybernetics and Informatics (SCI 2002). 2002.
M. Heil, A. L. Hazel, and J. Boyle, “Solvers for large-displacement fluid–structure interaction problems: segregated versus monolithic approaches”, Computational Mechanics, vol. 43. p. 91–101, 2008.
P. E. Gill, W. Murray, and M. A. Saunders, “SNOPT: An SQP algorithm for large–scale constraint optimization”, SIAM Journal of Optimization, vol. 12. p. 979–1006, 2002.
P. E. Gill, W. Murray, and M. A. Saunders, “SNOPT: An SQP Algorithm for Large-Scale Constrained Optimization”, SIAM Review, vol. 47. p. 99-131, 2005.
P. E. Gill, W. Murray, and M. A. Saunders, “SNOPT: An SQP Algorithm for Large-Scale Constrained Optimization”, SIAM Review, vol. 47. p. 99–131, 2005.
P. E. Gill, W. Murray, and M. A. Saunders, “SNOPT: An SQP algorithm for large-scale constrained optimization”, SIAM Journal of Optimization, vol. 12. p. 979–1006, 2002.
P. Fuglsang, et al., “Site-Specific Design Optimization of Wind Turbines”, Wind Energy, vol. 5. p. 261–279, 2002.
P. Fuglsang and K. Thomsen, “Site-Specific Design Optimization of 1.5–2.0 MW Wind Turbines”, Journal of Solar Energy Engineering, vol. 123. p. 296–303, 2001.
S. E. Cliff, J. J. Reuther, D. A. Saunders, and R. M. Hicks, “Single-Point and Multipoint Aerodynamic Shape Optimization of High-Speed Civil Transport”, Journal of Aircraft, vol. 38. p. 997–1005, 2001.
K. Deb, “Single and Multi-Objective Optimization using Evolutionary Computation”. 2004.
S. Suzuki, “Simultaneous Structure/Control Design Synthesis for Aero-Servo-Elastic System”, Finite Elements in Analysis and Design, vol. 14. 1993.
K. Willcox and S. Wakayama, “Simultaneous Optimization of a Multiple-Aircraft Family”, Journal of Aircraft, vol. 40. p. 616–622, 2003.
R. T. HAFTKA, “Simultaneous Analysis and Design”, {AIAA} Journal, vol. 23. 1985.
K. F. Hulme and C. L. Bloebaum, “A simulation-based comparison of multidisciplinary design optimization solution strategies using CASCADE”, Structural and Multidisciplinary Optimization, vol. 19. p. 17–35, 2000.
M. Hamdi, B. T. Hmaid, and S. Mohamed, “Simulation of Pollutant Emissions from a Gas-Turbine Combustor”, Combustion Science and Technology. 2004.
G. P. Merker, C. Schwarz, G. Stiesch, and F. Otto, “Simulating Combustion: Simulation of combustion and pollutant formation for engine-development”. 2004.
J. E. Hicken and D. W. Zingg, “A Simplified and Flexible Variant of GCROT”, {SIAM} Journal on Scientific Computing. 2009.
J. A. Nelder and R. Mead, “Simplex Method for Function Minimization”, Computer Journal, vol. 7. p. 308–313, 1965.
E. Lund, H. Moller, and L. A. Jakobsen, “Shape Design Optimization of Stationary Fluid-Structure Interaction Problems with Large Displacements and Turbulence”, Structural and Multidisciplinary Optimization, vol. 25. p. 383–392, 2003.
M. A. Akgün, R. T. HAFTKA, C. K. Wu, and J. L. Walsh, “Sensitivity of Lumped Constraints Using the Adjoint Method”, Proceedings of the 40th Structures, Structural Dynamics and Materials Conference, St. Louis, Missouri. 1999.
J. Sobieszczanski–Sobieski, “Sensitivity of Complex, Internally Coupled Systems”, AIAA Journal, vol. 28. p. 153–160, 1990.
L. Green, P. Newman, and K. Haigler, “Sensitivity Derivatives for Advanced CFD Algorithm and Viscous Modeling Parameters via Automatic Differentiation”, Proceedings of the 11th {AIAA} Computational Fluid Dynamics Conference, {AIAA} Paper 93-3321. 1993.
H. M. Adelman and R. T. HAFTKA, “Sensitivity Analysis of Discrete Structural Systems”, AIAA Journal, vol. 24. p. 823–832, 1986.
C. S. Kim, C. Kim, and O. H. Rho, “Sensitivity Analysis for the N-S Equations with Two-Equation Turbulence Models”, AIAA Journal, vol. 39. p. 838–845, 2001.
W. K. Anderson, J. C. Newman, D. L. Whitfield, and E. J. Nielsen, “Sensitivity analysis for the Navier–Stokes equations on unstructured meshes using complex variables”. 1999.
J. Sobieszczanski–Sobieski, “Sensitivity Analysis and Multidisciplinary Optimization for Aircraft Design: Recent Advances and Results”, Journal of Aircraft, vol. 27. p. 993–1001, 1990.
J. R. R. A. Martins, “Self-Similar Solutions for the Plane Turbulent Jet”. 1995.
S. Obayashi and D. Sasaki, “Self-organizing map of Pareto solutions obtained from multiobjective supersonic wing design”. 2002.
K. Deb and H. G. Beyer, “Self-Adaptive Genetic Algorithms with Simulated Binary Crossover”. 1999.
J. E. Renaud, “Second Order Based Multidisciplinary Design Optimization Algorithm Development”, Advances in Design Automation, vol. 2. p. 347–357, 1993.
E. Jones, T. Oliphant, P. Peterson, and others, “SciPy: Open source scientific tools for Python”. .
Sutkus, D.J., S. L. Baughcum, and D. P. DuBois, “Scheduled Civil Aircraft Emission Inventories for 1999: Database Development and Analysis”. 2001.
S. L. Baughcum, T. G. Tritz, S. C. Henderson, and D. C. Pickett, “Scheduled Civil Aircraft Emission Inventories for 1992: Database Development and Analysis”. 1996.
S. L. Baughcum, S. C. Henderson, and T. G. Tritz, “Scheduled Civil Aircraft Emission Inventories for 1976 and 1984: Database Development and Analysis”. 1996.
M. Barcelos, H. Bavestrello, and K. Maute, “A Schur–Newton–Krylov solver for steady-state aeroelastic analysis and design sensitivity analysis”, Computer Methods in Applied Mechanics and Engineering, vol. 195. p. 2050–-2069, 2006.
J. Woods-Vedeler and A. Pototzky, “Rolling Maneuver Load Alleviation Using Active Controls”, Journal of Aircraft, vol. 32. p. 68 - 76, 1995.
A. Richards and J. P. How, “Robust Variable Horizon Model Predictive Control for Vehicle Maneuvering”, International Journal of Robust Nonlinear Control, vol. 16. p. 333-351, 2006.
Y. Makino and I. Kroo, “Robust Objective Functions for Sonic-Boom Minimization”, Journal of Aircraft, vol. 43. p. 1301–1306, 2006.
A. Abate and L. E. Ghaoui, “Robust Model Predictive Control through Adjustable Variables: an application to Path Planning”, 43rd IEEE Conference on Decision and Control. p. 2485 - 2490, 2004.
F. Van Keulen, R. T. Haftka, and N. H. Kim, “Review of options for structural design sensitivity analysis. Part 1: Linear systems”, Computer Methods in Applied Mechanics and Engineering, vol. 194. p. 3213–3243, 2005.
G. P. Guruswamy, “A review of numerical fluids/structures interface methods for computations using high-fidelity equations”, Computers and Structures, vol. 80. p. 31–41, 2002.
J. S. Arora and Q. Wang, “Review of formulations for structural and mechanical system optimization”, Structures and Multidisciplinary Optimization Multidisciplinary Optimization, vol. 30. p. 251–272, 2005.
R. H. Myers, “Response surface methodology: Process and product optimization using designed experiments”. 2002.
R. S. Sellar, S. M. Batill, and J. E. Renaud, “Response Surface Based, Concurrent Subspace Optimization for Multidisciplinary System Design”, Proceedings of the 34th AIAA Aerospace Sciences Meeting and Exhibit. 1996.
P. P. Friedmann, “Renaissance of Aeroelasticity and Its Future”, Journal of Aircraft, vol. 36. p. 105–121, 1999.
G. R. Hough, “Remarks on Vortex–Lattice Methods”, Journal of Aircraft, vol. 10. p. 314–317, 1973.
C. Crawford, “Re-examining the Precepts of the Blade Element Momentum Theory for Coning Rotors”, Wind Energy, vol. 9. p. 457-478, 2006.
A. Jameson, “Re-Engineering the Design Process through Computation”. 1997.
D. L. Grose, “Reengineering the Aircraft Design Process”. 1994.
A. Jameson and S. Kim, “Reduction of the Adjoint Gradient Formula for Aerodynamic Shape Optimization Problems”, {AIAA} Journal, vol. 41. p. 2114–2129, 2003.
M. Fagan and A. Carle, “Reducing Reverse-Mode Memory Requirements by Using Profile-Driven Checkpointing”, Future Generation Comp. Syst., vol. 21. p. 1380–1390, 2005.
V. Williams, R. B. Noland, A. Majumdar, R. Toumi, W. Ochieng, and J. Molloy, “Reducing environmental impacts of aviation with innovative air traffic management technologies”, The Aeronautical Journal. p. 741–749, 2007.
G. K. W. Kenway, et al., “Reducing Aviation's Environmental Impact Through Large Aircraft For Short Ranges”, Proceedings of the 48th AIAA Aerospace Sciences Meeting and Exhibit. 2010.
C. E. Orozco and O. N. Ghattas, “A Reduced SAND Method for Optimal Design of Non-Linear Structures”, International Journal for Numerical Methods in Engineering, vol. 40. 1997.
C. J. Marriage and J. R. R. A. Martins, “Reconfigurable Semi-Analytic Sensitivity Methods and MDO Architectures Within the $π$MDO Framework”, Proceedings of the 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. 2008.
N. M. Alexandrov and R. M. Lewis, “Reconfigurability in MDO Problem Synthesis, Part 2”, In Proceedings of the 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. 2004.
N. M. Alexandrov and R. M. Lewis, “Reconfigurability in MDO Problem Synthesis, Part 1”, In Proceedings of the 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. 2004.
R. Giering and T. Kaminski, “Recipes for adjoint code construction.”, ACM Transactions on Mathematical Software, vol. 24. p. 437-474, 1998.
R. Fletcher and M. J. D. Powell, “A rapidly convergent descent method for minimization”, The Computer Journal, vol. 6. p. 163–168, 1963.
D. Blezek, “Rapid prototyping with SWIG”, C/C++ Users J., vol. 16. p. 61–65, 1998.
R. Giering and T. Kaminski, “Recipes for Adjoint Code Construction”, ACM Transactions on Mathematical Software, vol. 24. p. 437–474, 1998.
C. E. Lan, “A Quasi-Vortex-Lattice Method in Thin Wing Theory”, Journal of Aircraft, vol. 11. p. 518–527, 1974.
J. Lu and D. L. Darmofal, “A Quasi-Minimal Residual Method for Simultaneous Primal-Dual Solutions and Superconvergent Functional Estimates”, {SIAM} Journal on Scientific Computing, vol. 24. p. 1693–1709, 2003.
{J. E. Dennis and J. J. Moreé, “Quasi-Newton Methods, Motivation and Theory”, SIAM Review, vol. 19. p. 46–89, 1977.
M. Drela, “QPROP Theory Document”. 2005.
H. P. Langtangen, “Python Scripting for Computational Science”. 2007.
M. Lutz, “Python Pocket Reference”. p. iii + 75, 1998.
D. M. Beazley, “Python Essential Reference”. 2006.
R. E. Perez and J. R. R. A. Martins, “pyACDT: An Object- Oriented Framework for Aircraft Design Modelling and Multidisciplinary Optimization”. 2010.
J. R. R. A. Martins, C. Marriage, and N. P. Tedford, “pyMDO: An Object-Oriented Framework for Multidisciplinary Design Optimization”, ACM Transactions on Mathematical Software, vol. 36. p. 20:1–20:25, 2009.
J. J. Alonso, P. LeGresley, E. van der Weide, J. R. R. A. Martins, and J. J. Reuther, “pyMDO: A Framework for High-Fidelity Multi-Disciplinary Optimization”, Proceedings of the 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. 2004.
R. E. Perez and J. R. R. A. Martins, “pyACDT: An Object-Oriented Framework for Aircraft Design Modelling and Multidisciplinary Optimization”, Proceedings of the 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. 2008.
A. Geist, A. Beguelin, J. Dongarra, W. Jiang, R. Manchek, and V. Sunderam, “PVM 3 User's Guide and Reference Manual”. 1993.
R. Haimes, “pV3: A Distributed System for Large-Scale Unsteady CFD Visualization”. 1994.
D. L. Rodriguez, “Propulsion/Airframe Integration and Optimization on a Supersonic Business Jet”, Proceedings of the 45th AIAA Aerospace Sciences Meeting and Exhibit. 2007.
Q. Thomson and J. R. R. A. Martins, “Progressive Validity Trust Region Optimization Using a Kriging Metamodel”, Proceedings of the 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. 2008.
Q. P. Thomson, “Progressive Validity Trust Region Optimization”. 2008.
Y. Lee, S. Jung, and D. - H. Choi, “Progressive Quadratic Response Surface Modeling using Inherited Latin-Hypercube Design”. 2006.
M. Lutz, “Programming Python”. p. xxii + 880, 1996.
M. Karpel, “Procedures and Models for Aeroservoelastic Analysis and Design”, 78th Annual GAMM Conference. .
S. F. Arroyo, E. J. Cramer, J. E. Dennis, and P. D. Frank, “Problem Formulations for Systems of Systems”, Proceedings of the 2005 IEEE International Conference on Systems, Man and Cybernetics. p. 64–71, 2005.
J. E. Dennis and R. M. Lewis, “Problem Formulations and Other Optimization Issues in Multidisciplinary Optimization”, AIAA Symposium on Fluid Dynamics. 1994.
E. J. Cramer, J. E. Dennis, P. D. Frank, R. M. Lewis, and G. R. Shubin, “Problem Formulation for Multidisciplinary Optimization”, {SIAM} Journal on Optimization, vol. 4. p. 754–776, 1994.
R. L. Bisplinghoff and H. Ashley, “Principles of Aeroelasticity”. 1975.
H. P. Langtangen, “A Primer on Scientific Computing with Python”. 2009.
P. Hajela, “Preliminary Weight Estimation of Conventional and Joined Wings using Equivalent Beam Models”, Journal of Aircraft, vol. 25. p. 574–576, 1988.
C. Alan, F. Mike, and G. L. L., “Preliminary Results from the Application of Automated Adjoint Code Generation to CFL3D”. 1998.
P. Piperni, M. Abdo, F. Kafyeke, and A. T. Isikveren, “Preliminary Aerostructural Optimization of a Large Business Jet”, Journal of Aircraft, vol. 44. p. 1422–1438, 2007.
J. B. Moss, “Predictive methods for gas turbine combustor emissions”, IMechE Seminar Publication, vol. Gas Turbine Pollutant Emissions. 2001.
N. K. Rizk, J. S. Chin, A. W. Marshall, and M. K. Razdan, “Predictions of NOx Formation Under Combined Droplet and Partially Premixed Reaction of Diffusion Flame Combustors”, Journal of Engineering for Gas Turbines and Power, vol. 124. p. 31-38, 2002.
N. K. Rizk, J. S. Chin, A. W. Marshall, and M. K. Razdan, “Predictions of NOx Formation Under Combined Droplet and Partially Premixed Reaction of Diffusion Flame Combustors”, Journal of Engineering for Gas Turbines and Power, vol. 124. p. 31-38, 2002.
Y. - J. Park, D. E. Richardson, D. C. Montgomery, A. Ozol-Godfrey, C. M. Borror, and C. M. Anderson-Cook, “Prediction Variance Properties of Second-Order Designs for Cuboidal Regions”, Journal of Quality Technology, vol. 37. p. 253-266, 2005.
L. Tsague, J. Tsogo, and T. T. Tatietse, “Prediction of the Production of Nitrogen Oxide (NOx) in Turbojet Engines”, Atmospheric Environment, vol. 40. 2006.
L. Tsague, J. Tsogo, and T. T. Tatietse, “Prediction of the Production of Nitrogen Oxide ($NO_x$) in Turbojet Engines”, Atmospheric Environment, vol. 40. p. 5727�5733, 2006.
S. Basu, A. M. Waas, and D. R. Ambur, “Prediction of Progressive Failure in Multidirectional Composite Laminated Panels”, International Journal of Solids And Structures, vol. 44. p. 2648–2676, 2007.
H. S. Morse, “Practical Parallel Computing”. 1994.
P. E. Gill, W. Murray, and M. H. Wright, “Practical Optimization”. 1981.
P. E. Gill, W. Murray, and M. H. Wright, “Practical Optimization”. 1981.
P. E. Gill, W. Murray, and M. H. Wright, “Practical Optimization”. 1981.
P. E. Gill, W. Murray, and M. H. Wright, “Practical Optimization”. 1981.
P. E. Gill, W. Murray, and M. H. Wright, “Practical Optimization”. 1981.
EUROCONTROL, “Potential Environmental Impact on ATM Capacity, a Preliminary Assessment. Third progress report”. 1997.
R. D. Braun, I. M. Kroo, and P. J. Gage, “Post-Optimality Analysis in Aerospace Vehicle Design”, Proceedings of the AIAA Aircraft Design, Systems and Operations Meeting. 1993.
D. L. Allaire, “A Physics-Based Emissions Model for Aircraft Gas Turbine Combustors”. 2006.
S. Balay, et al., “PETSc Web page”. 2001.
S. Balay, et al., “PETSc Users Manual”. 2004.
K. G. Bowcutt, “A Perspective on the Future of Aerospace Vehicle Design”, Proceedings of the 12th AIAA International Space Planes and Hypersonic Systems and Technologies. 2003.
A. Griewank, “Personal communication”. 1998.
R. T. O. A. V. T. P. T. G. AVT-018, “Performance prediction and simulation of gas turbine engine operation”. 2002.
R. T. O. A. V. T. P. T. G. AVT-036, “Performance prediction and simulation of gas turbine engine operation for aircraft, maritime, vehicular, and power generation”. 2007.
P. Cusdin and J. - D. Müller, “On the Performance of Discrete Adjoint CFD Codes using Automatic Differentiation”, International Journal of Numerical Methods in Fluids, vol. 47. p. 939-945, 2005.
A. Schafer and D. G. Victor, “The Past and Future of Global Mobility”, Scientific American. p. 36-39, 1997.
C. A. Felippa, K. C. Park, and C. Farhat, “Partitioned analysis of coupled mechanical systems”, Computer Methods in Applied Mechanics and Engineering, vol. 190. p. 3247–3270, 2001.
K. E. Parsopoulos and M. N. Vrahatis, “Particle Swarm Optimization Method for Constrained Optimization Problems”, Euro–International Symposium on Computational Intelligence 2002. p. 214–220, 2002.
P. C. Fourie and A. A. Groenwold, “The Particle Swarm Optimization Algorithm in Size and Shape Optimization”, Structural and Multidisciplinary Optimization, vol. 23. p. 252–267, 2002.
G. Venter and J. Sobieszczanski–Sobieski, “Particle Swarm Optimization”, {AIAA} Journal, vol. 41. p. 1583–1589, 2003.
J. Kennedy and R. C. Eberhart, “Particle Swarm Optimization”, IEEE International Conference on Neural Networks, vol. IV. p. 1942–1948, 1995.
G. Venter and J. Sobieszczanski-Sobieski, “Particle Swarm Optimization”, 3rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. 2002.
V. G. J. Sobieszczanski-Sobieski, “Particle Swarm Optimization”, 3rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. 2002.
R. Perez and K. Behdinan, “Particle Swarm Approach for Structural Design Optimization”, International Journal of Computer and Structures, vol. 85. p. 1579-1588, 2007.
R. E. Perez and K. Behdinan, “Particle swarm approach for structural design optimization”, Computers & Structures, vol. 85. p. 1579–1588, 2007.
M. Athanasopoulos, H. Ugail, and G. G. Castro, “Parametric design of aircraft geometry using partial differential equations”, Advances in Engineering Software, vol. 40. p. 479–486, 2009.
G. J. Kennedy and J. R. R. A. Martins, “Parallel Solution Methods for Aerostructural Analysis and Design Optimization”, Proceedings of the 13th AIAA/ISSMO Multidisciplinary Analysis Optimization Conference. 2010.
J. J. Evans, “Parallel Programming Tools”, Wiley Encyclopedia of Computer Science and Engineering. 2008.
B. Wilkinson and C. M. Allen, “Parallel Programming: Techniques and Applications Using Networked Workstations and Parallel Computers”. 1999.
J. Sobieszczanski-Sobieski and G. Venter, “A Parallel Particle Swarm Optimization Algorithm Accelerated by Asynchronous Evaluations”, 6th World Congresses of Structural and Multidisciplinary Optimization. 2005.
G. Venter and J. Sobieszczanski-Sobieski, “A Parallel Particle Swarm Optimization Algorithm Accelerated by Asynchronous Evaluations”, Sixth World Congresses of Structural and Multidisciplinary Optimization. 2005.
J. E. Hicken and D. W. Zingg, “A Parallel Newton–Krylov Solver for the Euler Equations Discretized Using Simultaneous Approximation Terms”, {AIAA} Journal, vol. 46. 2008.
J. E. Hicken and D. W. Zingg, “A Parallel Newton–Krylov Flow Solver for Multi-Block Grids”, Proceedings of the 18th AIAA Computational Fluid Dynamics Conference. 2007.
G. Biros and O. Ghattas, “Parallel Largrange–Newton–Krylov–Schur methods for PDE-constrained optimization. Part II: The Largrange–Newton solver and its application to optimal control of steady viscous flows”, {SIAM} Journal on Scientific Computing, vol. 27. p. 687–713, 2005.
G. Biros and O. Ghattas, “Parallel Largrange–Newton–Krylov–Schur methods for PDE-constrained optimization. Part I: The Krylov–Schur solver”, {SIAM} Journal on Scientific Computing, vol. 27. p. 687–713, 2005.
J. F. Schutte, J. A. Reinbolt, B. J. Fregly, R. T. Haftka, and A. D. George, “Parallel global optimization with particle swarm algorithm”, Journal of Numerical Methods in Engineering, vol. 61. p. 2296–2315, 2004.
K. Kubota, “PADRE2 –- FORTRAN Precompiler for Automatic Differentiation and Estimates of Rounding Errors”, Computational Differentiation: Techniques, Applications, and Tools. p. 367–374, 1996.
{N. I. of Standards and Technology}, “Package CMLIB”. .
J. C. Newman III, A. C. Taylor III, R. W. Barnwell, P. A. Newman, and G. J. –W. Hou, “Overview of Sensitivity Analysis and Shape Optimization for Complex Aerodynamic Configurations”, Journal of Aircraft, vol. 36. p. 87–96, 1999.
A. J. De Wit and F. Van Keulen, “Overview of Methods for Multilevel and/or Multidisciplinary Optimization”, Proceedings of the 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. 2010.
N. M. Alexandrov and R. M. Lewis, “An Overview of First-Order Model Management for Engineering Optimization”, Optimization and Engineering, vol. 2. p. 413–-430, 2001.
K. J. Fidkowski and D. L. Darmofal, “Output-Based Error Estimation and Mesh Adaptation in Computational Fluid Dynamics: Overview and Recent Results”, AIAA Journal, vol. 49. p. 673–694, 2011.
J. L. Rogers and C. L. Bloebaum, “Ordering Design Tasks Based on Coupling Strenghts”. 1994.
R. T. Haftka, J. Sobieszczanski–Sobieski, and S. L. Padula, “On options for interdisciplinary analysis and design optimization”, Structural Optimization, vol. 4. p. 65–74, 1992.
S. K. Nadarajah and A. Jameson, “Optimum Shape Design for Unsteady Three-Dimensional Viscous Flows Using a Nonlinear Frequency-Domain Method”, Journal of Aircraft, vol. 44. p. 1513-1527, 2007.
J. - F. M. Barthelemy and J. Sobieszczanski–Sobieski, “Optimum Sensitivity Derivatives of Objective Functions in Nonlinear Programming”, AIAA Journal, vol. 21. p. 913–915, 1982.
O. Pironneau, “On Optimum Design in Fluid Mechanics”, Journal of Fluid Mechanics, vol. 64. p. 97–110, 1974.
A. Jameson, L. Martinelli, and N. A. Pierce, “Optimum Aerodynamic Design Using the Navier–Stokes Equations”, Theoretical and Computational Fluid Dynamics, vol. 10. p. 213–237, 1998.
A. Jameson, “Optimum Aerodynamic Design Using CFD and Control Theory”. 1995.
J. Olvander and P. Krus, “Optimizing the Optimization – A Method for Comparison of Optimization Algorithms”. 2006.
H. H. J. Bloemen, T. J. J. van den Boom, and H. B. Verbruggen, “Optimizing the end-point state-weighting matrix in model-based predictive control”, Automatica, vol. 38. p. 1061 - 1068, 2002.
J. Driver and D. W. Zingg, “Optimized Natural-Laminar-Flow Airfoils”, Proceedings of the 44th AIAA Aerospace Sciences Meeting and Exhibit. 2006.
N. Alexandrov, R. Lewis, C. Gumbert, L. Green, and P. Newman, “Optimization with Variable-Resolution Models Applied to Aerodynamic Wing Design”, In Proceedings of the 38th AIAA Aerospace Sciences Meeting and Exhibit. 2000.
P. M. Pardalos, “Optimization Software Guide (Jorge J. Moré and Stephen J. Wright)”, SIAM Review, vol. 36. p. 518-518, 1994.
M. P. Bendsøe, “Optimization of Structural Topology, Shape and Material”. 1995.
J. Hua, F. M. Kong, P. J. Liu, and D. W. Zingg, “Optimization of Long-Endurance Airfoils”, Proceedings of the 21st AIAA Applied Aerodynamics Conference. 2003.
M. Nemec and D. W. Zingg, “Optimization of High-Lift Configurations Using a Newton–Krylov Algorithm”, Proceedings of the 16th AIAA Computational Fluid Dynamics Conference. 2003.
N. Khot, K. Appa, and F. Eastep, “Optimization of Flexible Wing Without Ailerons for Rolling Maneuver”, Journal of Aircraft, vol. 37. 2000.
R. J. Balling and J. Sobieszczanski-Sobieski, “Optimization of Coupled Systems: A Critical Overview of Approaches”, {AIAA} Journal, vol. 34. p. 6–17, 1996.
M. S. Eldred, et al., “Optimization of complex mechanics simulations with object-oriented software design”, Computer Modeling and Simulation in Engineering, vol. 1. 1996.
K. Maute, M. Lesoinne, and C. Farhat, “Optimization of Aeroelastic Systems Using Coupled Analytical Sensitivities”. 2000.
P. Fuglsang and H. A. Madsen, “Optimization Method for Wind Turbine Rotors”, Journal of Wind Engineering and Industrial Aerodynamics, vol. 80. p. 191–206, 1999.
J. L. Walsh, K. C. Young, F. J. Tarzanin, J. E. Hirsh, and D. K. Young, “Optimization Issues with Complex Rotocraft Comprehensive Analysis”. 1998.
A. B. T. D. R. amd Chandrupatla, “Optimization Concepts and Applications in Engineering”. 1999.
A. D. Belegundu and T. R. Chandrupatla, “Optimization Concepts and Applications in Engineering”. 1999.
A. D. Belegundu and T. R. Chandrupatla, “Optimization Concepts and Applications in Engineering”. 1999.
A. D. Belegundu and T. R. Chandrupatla, “Optimization Concepts and Applications in Engineering”. 1999.
T. G. Kolda, R. M. Lewis, and V. Torczon, “Optimization by Direct Search: New Perspectives on Some Classical and Modern Methods”, SIAM Review, vol. 45. p. 385–482, 2004.
J. Sobieszczanski–Sobieski, “Optimization by Decomposition: A Step from Hierarchic to Non-Hierarchic Systems”. 1988.
K. James, “Optimal Structural Topology Design for Multiple Cases with Stress Constraints”. 2006.
M. Nemec, “Optimal Shape Design of Aerodynamic Configurations: A Newton–Krylov Approach”. 2003.
W. C. Rooney and L. T. Biegler, “Optimal Process Design with Model Parameter Uncertainity and Process Variability”. 2002.
J. T. Allison and P. Y. Papalambros, “Optimal Partitioning and Coordination Decisions in System Design Using an Evolutionary Algorithm”, Proceedings of the 7th World Congress on Structural and Multidisciplinary Optimization, Seoul, South Korea. 2007.
E. Benini, “Optimal Design of Horizontal-Axis Wind Turbines Using Blade-Element Theory and Evolutionary Computation”, Journal of Solar Energy Engineering, vol. 124. p. 357-363, 2002.
E. J. Haug and T. - T. Feng, “Optimal design of dynamically loaded continuous structures”, International Journal for Numerical Methods in Engineering, vol. 12. p. 299–317, 1978.
J. C. Meza, R. A. Oliva, P. D. Hough, and P. J. Williams, “OPT++: An object-oriented toolkit for nonlinear optimization”, {ACM} Transactions on Mathematical Software, vol. 33. p. 12, 2007.
S. Brown, “OPRAD –- A Users Guide to the OPtima Reverse Automatic Differentiation Tool”. 1995.
M. Bartholomew-Biggs, “OPFAD –- A Users Guide to the OPtima Forward Automatic Differentiation Tool”. 1995.
J. Gray, K. T. Moore, and B. A. Naylor, “OpenMDAO: An Open Source Framework for Multidisciplinary Analysis and Optimization”, Proceedings of the 13th AIAA/ISSMO Multidisciplinary Analysis Optimization Conference. 2010.
E. R. Gansner and S. C. North, “An open graph visualization system and its applications to software engineering”, Software –- Practice and Experience, vol. 30. p. 1203–1233, 2000.
C. Faure and Y. Papegay, “Odyssée Version 1.6: The Language Reference Manual”. 1997.
M. Sala, “An Object-Oriented Framework for the Development of Scalable Parallel Multilevel Preconditioners”, ACM Transactions on Mathematical Software, vol. 32. p. 396–416, 2006.
J. R. R. A. Martins and C. Marriage, “An Object-Oriented Framework for Multidisciplinary Design Optimization”, Proceedings of the 3rd AIAA Multidisciplinary Design Optimization Specialist Conference. 2007.
M. O'Docherty, “Object-Oriented Analysis and Design”. 2005.
Anonymous, “OAG Aviation”. .
H. Jurgens and D. W. Zingg, “Numerical Solution of the Time-Domain Maxwell Equations Using High-Accuracy Finite-Difference Methods”, {SIAM} Journal on Scientific Computing, vol. 22. p. 1675–1696, 2000.
A. Jameson, W. Schmidt, and E. Turkel, “Numerical Solution of the Euler Equations by Finite Volume Methods Using Runge-Kutta Time Stepping Schemes”. 1981.
J. Nocedal and S. J. Wright, “Numerical Optimization”. 2006.
J. Nocedal and S. J. Wright, “Numerical Optimization”. 1999.
J. Nocedal and S. J. Wright, “Numerical Optimization”. 2006.
J. Nocedal and S. J. Wright, “Numerical Optimization”. 2006.
J. Nocedal and S. J. Wright, “Numerical Optimization”. 1999.
J. Nocedal and S. J. Wright, “Numerical Optimization”. 2006.
J. Nocedal and S. J. Wright, “Numerical Optimization”. 1999.
J. Nocedal and S. J. Wright, “Numerical Optimization”. 2006.
J. Nocedal and S. J. Wright, “Numerical Optimization”. 2006.
J. Nocedal and S. J. Wright, “Numerical Optimization”. 2006.
J. Nocedal and S. J. Wright, “Numerical Optimization”. 2006.
J. Nocdedal and W. S.J., “Numerical Optimization”. 1999.
P. E. Gill, W. Murray, and M. H. Wright, “Numerical linear algebra and optimization”. 1991.
O. Sigmund, “Numerical Instablities in Topology Optimization: A Survey on Procedures Dealing with Checkerboards, Mesh-Dependencies and Local Minima”, Structural Optimization, vol. 16. p. 68–75, 1998.
R. Thareja and R. T. Haftka, “Numerical difficulties associated with using equality constraints toachieve multi-level decomposition in structural optimization”, 27th Structures, Structural Dynamics and Materials Conference. p. 21–28, 1986.
J. N. Lyness and C. B. Moler, “Numerical Differentiation of Analytic Functions”, SIAM Journal on Numerical Analysis, vol. 4. p. 202–210, 1967.
J. N. Lyness, “Numerical algorithms based on the theory of complex variable”, Proceedings –- ACM National Meeting. p. 125–133, 1967.
J. Driver and D. W. Zingg, “Numerical Aerodynamic Optimization Incorporating Laminar-Turbulent Transition Prediction”, AIAA Journal, vol. 45. p. 1810–1818, 2007.
J. Samareh, “A Novel Shape Parameterization Approach”. 1999.
A. A. Giunta, “A Novel Sensitivity Analysis Method for High Fidelity Multidisciplinary Optimization of Aero-Structural Systems”, Proceedings of the 38th AIAA Aerospace Sciences Meeting and Exhibit. 2000.
S. V. Lyapunov, “Nonplanar Wings with Minimum Induced Drag”, Fluid Dynamics, vol. 28. p. 238–243, 1993.
I. Kroo, “Nonplanar Wing Concepts for Increased Aircraft Efficiency”, {VKI} lecture series on Innovative Configurations and Advanced Concepts for Future Civil Aircraftecture series on Innovative Configurations and Advanced Concepts for Future Civil Aircraft. 2005.
I. Kroo, “Nonplanar Wing Concepts for Increased Aircraft Efficiency”. 2005.
C. M. Shearer and C. E. Cesnik, “Nonlinear Flight Dynamics of Very Flexible Aircraft”, Journal of Aircraft, vol. 44. p. 1528 - 1545, 2007.
C. M. Shearer and C. E. Cesnik, “Nonlinear Flight Dynamics of Very Flexible Aircraft”, Journal of Aircraft, vol. 44. p. 1528 -1545, 2007.
J. Ko, A. J. Kurdila, and T. W. Strganac, “Nonlinear Control of a Prototypical Wing Section with a Torsional Nonlinearity”, Journal of Guidance, Control and Dynamics, vol. 20. p. 1181–1189, 1997.
V. Mukhopadhyay, J. R. Newsom, and I. Abel, “Nonlinear Control of a Prototypical Wing Section with a Torsional Nonlinearity”, Journal of Guidance, Control and Dynamics, vol. 20. p. 1181–1189, 1997.
Y. H. Dai and Y. Yuan, “A Nonlinear Conjugate Gradient with A Strong Global Convergence Property”, {SIAM} Journal on Optimization, vol. 10. p. 177–182, 1999.
W. Su and C. E. S. Cesnik, “Nonlinear Aeroelasticity of a Very Flexible Blended-Wing-Body Aircraft”, Journal of Aircraft, vol. 47. p. 1539–1553, 2010.
C. L. Bloebaum, P. Hajela, and J. Sobieszczanski–Sobieski, “Non-hierarchic system decomposition in structural optimization”, Proceedings of the 3rd USAF/NASA Symposium on Recent Advances in Multidisciplinary Analysis and Optimization. 1990.
C. L. Bloebaum, P. Hajela, and J. Sobieszczanski–Sobieski, “Non-Hierarchic System Decomposition in Structural Optimization”, Engineering Optimization, vol. 19. p. 171–186, 1992.
B. ; H. ;C. L. P. J. Sobieszczanski-Sobieski, “NON-HIERARCHIC SYSTEM DECOMPOSITION IN STRUCTURAL OPTIMIZATION”, Engineering Optimization, vol. 19. p. 171 – 186, 1992.
K. Schittkowski, “NLPQL: A Fortran subroutine for solving constrained nonlinear programming problems”, Annals of Operations Research, vol. 5. p. 485-500, 1985.
I. R. Chittick and J. R. R. A. Martins, “A New Subspace Optimization Method for Aero-Structural Design”, Proceedings of the 3rd AIAA Multidisciplinary Design Optimization Specialist Conference. 2007.
I. R. Chittick, “A New Subspace Optimization Method for Aerostructural Design”. 2007.
C. G. Raspanti, J. A. Bandoni, and L. T. Biegler, “New strategies for flexibility analysis and design under uncertainty”, Computers and Chemical Engineering, vol. 24. p. 2193–2209, 2000.
U. Herrmann, “New Results in Numerical and Experimental Fluid Mechanics V”, Notes on Numerical Fluid Mechanics and Multidisciplinary Design, vol. 92. p. 120–127, 2006.
R. C. Eberhart and J. A. Kennedy, “New Optimizer Using Particle Swarm Theory”, Sixth International Symposium on Micro Machine and Human Science. p. 39–43, 1995.
R. Eberhart and J. Kennedy, “A New Optimizer Using Particle Swarm Theory”, 6th International Symposium on Micro Machine and Human Science. 1995.
O. Tekinalp and G. Karsli, “A New Multiobjective Simulated Annealing Algorithm”, Journal Global Optimization, vol. 36. p. 49–77, 2007.
P. J. Gage, “New approaches to optimization in aerospace conceptual design”. 1994.
P. Gage, “New Approaches to Optimization in Aerospace Conceptual Design”. 1994.
A. B. Lambe and J. R. R. A. Martins, “A New Approach to Multidisciplinary Design Optimization via Internal Decomposition”, Proceedings of the 13th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. 2010.
E. de Strurler, “Nested Krylov methods based on GCR”, Journal of Computational and Applied Mathematics, vol. 67. p. 15–41, 1996.
I. M. Kroo, R. Tracy, J. Chase, and P. Sturdza, “Natural Laminar Flow for Quiet and Efficient Supersonic Aircraft”. 2002.
M. Nemec and D. W. Zingg, “Newton–Krylov Algorithm for Aerodynamic Design Using the Navier–Stokes Equations”, {AIAA} Journal, vol. 40. p. 1146–1154, 2002.
D. W. Zingg, M. Nemec, and T. T. Chisholm, “A Newton–Krylov Algorithm for Aerodynamic Analysis and Design”, Computational Fluid Dynamics 2002. 2003.
D. Sasaki, S. Obayashi, and K. Nakahashi, “Navier–Stokes Optimization of Supersonic Wings with Four Design Objectives Using Evolutionary Algorithm”. 2001.
M. M. Munk, “My Early Aerodynamic Research –- Thoughts and Memories”, Annual Review of Fluid Mechanics, vol. 13. p. 1–7, 1981.
M. Nemec, D. W. Zingg, and T. H. Pulliam, “Multipoint and Multi-Objective Aerodynamic Shape Optimization”, AIAA Journal, vol. 42. p. 1057–1065, 2004.
M. Nemec, D. W. Zingg, and T. H. Pulliam, “Multi-Point and Multi-Objective Aerodynamic Shape Optimization”. 2002.
A. P. Seyranian, E. Lund, and N. Olhoff, “Multiple eigenvalues in structural optimization problems”, Structural and Multidisciplinary Optimization, vol. 8. p. 207-227, 1994.
A. Seshadri, “Multi-Objective Optimization Using Evolutionary Algorithms (MOEA)”. .
E. Zitzler and L. Thiele, “Multiobjective Evolutionary Algorithms: A Comparative Case Study and the Strength Pareto Approach”, IEEE Transactions on Evolutionary Computation, vol. 3. p. 257–271, 1999.
N. M. Alexandrov, “Multilevel Methods for MDO”, Multidisciplinary Design Optimization: State-of-the-Art. 1997.
L. A. Schmit Jr. and R. K. Ramanathan, “Multilevel approach to minimum weight design including buckling constraints”, {AIAA} Journal, vol. 16. p. 97–104, 1978.
N. Alexandrov and J. E. Dennis Jr., “Multilevel Algorithms for Nonlinear Optimization”. 1994.
P. R. Amestoy, I. S. Duff, and J. - Y. L'Excellent, “Multifrontal parallel distributed symmetric and unsymmetric solvers”, Computer Methods in Applied Mechanics and Engineering, vol. 184. p. 501 - 520, 2000.
T. D. Robinson, K. E. Willcox, M. S. Eldred, and R. Haimes, “Multifidelity Optimization for Variable-Complexity Design”. 2006.
A. DeBlois and M. Abdo, “Multi-Fidelity Multidisciplinary Design Optimization of Metallic and Composite Regional and Business Jets”, Proceedings of the 13$^{th}$ AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. 2011.
S. Choi, J. J. Alonso, I. M. Kroo, and M. Wintzer, “Multifidelity Design Optimization of Low-Boom Supersonic Jets”, Journal of Aircraft, vol. 45. p. 106–118, 2008.
S. Choi, “Multi-Fidelity and Multi-Disciplinary Design Optimization of Supersonic Business Jets”. 2005.
A. Nelson, J. J. Alonso, and T. H. Pulliam, “Multi-Fidelity Aerodynamic Optimization Using Treed Meta-Models”, Proceedings of the 18th AIAA Computational Fluid Dynamics Conference. 2007.
S. Kim, J. J. Alonso, and A. Jameson, “Multi-Element High-Lift Configuration Design Optimization Using Viscous Continuous Adjoint Method”, Journal of Aircraft, vol. 41. p. 1082–1097, 2004.
J. C. Newman, W. K. Anderson, and L. Whitfield, D., “Multidisciplinary Sensitivity Derivatives Using Complex Variables”. 1998.
J. C. {Newman III}, W. K. Anderson, and L. Whitfield, D., “Multidisciplinary Sensitivity Derivatives Using Complex Variables”. 1998.
F. Flager, B. Welle, P. Bansal, G. Soremekun, and J. Haymaker, “Multidisciplinary process integration and design optimization of a classroom building”. 2009.
A. Chattopadhyay and N. Pagaldipti, “A Multidisciplinary Optimization Using Semi-Analytical Sensitivity Analysis Procedure and Multilevel Decomposition”, Computers & Mathematics with Applications, vol. 29. p. 55–66, 1995.
A. R. Jones, “Multidisciplinary Optimization of Aircraft Design and Takeoff Operations for Low Noise”. 2006.
D. L. Rodriguez, “Multidisciplinary Optimization of a Supersonic Inlet Using a Cartesian CFD Method”. 2004.
R. Kalavalapally, R. Penmetsa, and R. Grandhi, “Multidisciplinary optimization of a lightweight torpedo structure subjected to an underwater explosion”, Finite Elements in Analysis and Design, vol. 43. p. 103–111, 2006.
J. J. Korte, R. P. Weston, and T. A. Zang, “Multidisciplinary Optimization Methods for Preliminary Design”. 1997.
I. M. Kroo, S. Altus, R. D. Braun, P. J. Gage, and I. P. Sobieski, “Multidisciplinary Optimization Methods for Aircraft Preliminary Design”, AIAA 5th Symposium on Multidisciplinary Analysis and Optimization. 1994.
B. Malone and W. H. Mason, “Multidisciplinary Optimization in Aircraft Design Using Analytic Technology Models”, Journal of Aircraft, vol. 32. p. 431-438, 1995.
R. E. Perez, “A Multidisciplinary Optimization Framework for Flight Dynamics and Control Integration in Aircraft Design”. 2007.
R. E. Perez, H. H. T. Liu, and K. Behdinan, “Multidisciplinary Optimization Framework for Control-Configuration Integration in Aircraft Conceptual Design”, Journal of Aircraft, vol. 43. p. 1937–1948, 2006.
J. Walsh, R. Weston, J. Samareh, B. Mason, L. Green, and R. Biedron, “Multidisciplinary High-fidelity Analysis and Optimization of Vehicles, Part 2: Preliminary Results”. 2000.

Pages

© 2010-2013 Multidisciplinary Design Optimization Laboratory All Rights Reserved